|
|
|
Flanges:
A flange is a forged or cast ring of steel designed to connect sections of pipe or join pipe to a pressure Vessel, pump or any other integral flanges assembly. Flanges are joined to each other by bolting and joined to the piping system by welding or threading. The basic types of flanges are; Slip on, Blind, Weld Neck, Threaded, Socket Weld, Lap Joint and Orifice. Flanges are designed to the following pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.
The most common facings machined on flanges are:
(a) Raised face, 1/16 inch for 150lb and 300lb, ¼ inch for 400lb and heavier.
(b) Flat face, for 150lb and 300lb only, other may be flat face on request.
(c) Ring type joint, may be applied to all pressure ratings.
The most common facings machined on flanges are:
(a) Raised face, 1/16 inch for 150lb and 300lb, ¼ inch for 400lb and heavier.
(b) Flat face, for 150lb and 300lb only, other may be flat face on request.
(c) Ring type joint, may be applied to all pressure ratings.
Fittings:
A fitting is used in pipe plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow. The term plumbing is generally used to describe conveyance of water, gas, or liquid waste in ordinary domestic or commercial environments, whereas piping is often used to describe high-performance (e.g. high pressure, high flow, high temperature, hazardous materials) conveyance of fluids in specialized applications. The term tubing is sometimes used for lighter-weight piping, especially types that are flexible enough to be supplied in coiled form. We can help you with all your fittings needs. Please contact us for any and all your needs. We also offer consulting to help you find solutions to your problems.
Fittings are: - but not limited to:
Tee
45's
90's
Street 90's
Nipples
Hammer Union
Union
Eccentric Reducer
Concentric Reducer
Bushing
Plug (Hex, Allen, Square, Round)
Coupling
Half Coupling
Cross
Crowsfoot
Elbowlet
Union
Cap
Thread-O-Let
Weld-O-Let
Sock-O-Let
Pipe Caps
Stub-In
Available in: Carbon Steel, Black Malleable Iron, 316 Stainless, 304
Stainless
Options: But-weld, Threaded, Socket-Weld
Fittings are: - but not limited to:
Tee
45's
90's
Street 90's
Nipples
Hammer Union
Union
Eccentric Reducer
Concentric Reducer
Bushing
Plug (Hex, Allen, Square, Round)
Coupling
Half Coupling
Cross
Crowsfoot
Elbowlet
Union
Cap
Thread-O-Let
Weld-O-Let
Sock-O-Let
Pipe Caps
Stub-In
Available in: Carbon Steel, Black Malleable Iron, 316 Stainless, 304
Stainless
Options: But-weld, Threaded, Socket-Weld
|
|
|
Fasteners:
We provide:
- All Sizes & Threads including SAE and metric.
- B7, B7M, B8, B8M
- Double Ends - Tap Ends
- B16, L7 with Nuts Assembled & Unassembled
- Hex Head Cap Screws
- Machine Bolts
- Special Bent Bolt
- J, L, and U Bolts
- Xylan and Custom Coatings Available
No Fastener Is Too Big Or Too Small!
24 HOURS A DAY, 7 DAYS A WEEK FOR ALL YOUR COMPANY'S NEEDS - office: (713) 726-0689
24 Hour: (713) 726-9881
24 Hour: (713) 726-9881